6 Programs for Controlling the Temperature of the Processor
The temperature of your processor is very important for the health and efficient use of your computer. But how and through which programs can you control the temperature of this hardware, which is very important for your computer?
Processors, one of the most important hardware parts of our computers, need to be cooled by air or liquid cooling. The processors can reach very high temperatures. Most desktop CPUs run between 50 and 70 degrees, with a good cooling system and carefully used thermal paste to keep the temperature of your CPU within these ranges.
So, how can you check the temperature of your CPU, or how much temperature your CPU reaches, is there a problem? To answer this question, any temperature above 90 degrees is a problem for your CPU. Excessive heat can shorten the life of your CPU or cause drowning.
You can tell that you are pushing the limits of your processor by the sudden shutdown of your computer, restarting itself at a time, ‘beep’ when opening and blue screen error.
If you have problems with your processor overheating, you can replace the thermal paste, clean the fan, replace the liquid cooler or air cooler. It is also worth mentioning that liquid cooling is more efficient than air cooling.
Temperature control programs
Although HWMonitor isn’t very good at the interface, it can measure your temperature as well as your kernel usage and clock speed. This program also measures the temperature, the fan speed, and your use of other computer hardware, but you can also choose to focus only on the CPU if you don’t want the program to strain your computer. With this program you can even name your CPU cores in the power category.
For those who just want to control the temperature without drowning in too much detail, the NZXT’s CAM program is the perfect match. The user interface is also very elegant. The CAM program can tell you the fan speed, clock speed, load and temperature of your CPU. It can also perform these operations for the GPU.
If you want more data, HWiNFO 64 may be the gateway you want to play. When you first install the program it will give you two options: sensors only and brief information only. As you can imagine, the mode gives you detailed information on the actual, only sensors option. When you select this mode, you will see a long list as in HWMonitor.
Core Temp is a much simpler program. It only measures the temperature and load of your CPU. With this program you can see your processor temperature in real time. In addition, before installing this program on the installation screen Goodgame Empire to install the game that you want to remove the check mark in the button.
SpeedFan is another program where you can monitor the temperature of your CPU and other components. This program also gives you manual control over your fan speed to keep your CPU as cold as possible. This program is a bit more complicated than the other programs on the list.
Open Hardware Monitor
The Open Hardware Monitor is very similar to HWMonitor and even feels the same when using it. The difference from HWMonitor is that it only comes with a zip file and you don’t have to install it on your computer. Apart from these, we can say that it is exactly the same as HWMoniter.